Door Right-Left Change - Teka TGF 390 NF Manuel D'utilisation

➢ Door right-left change

Before installation of accessories, it shall be ensured that the freezer is disconnected
from power.
Tools: cross screwdriver and 5/16'' socket and ratchet.
1. Remove the two nut caps and two hinge cover plates from the top beam (open the
door toward right)
Left cover plate
2. Remove decorating components from the top beam
Top beam decoration
3. Remove the two bolts fixed with hinges, pull the hinges out from one side
and dismantle the door at the same time. As last, take the hinges out from the
door
Nut cap
Bolts
29
Right cover plate
Top beam
decoration
Hinge
Wiring bundles