Fitting Instructions - R&G LP0284BK Instructions De Montage

Page 7 of 21
Picture 13
Picture 15
 Begin by removing the passenger seat using the key, as shown in picture 1.
 Slide the wiring distribution box out of its holder as shown in picture 2, then disconnect all three
connectors, noting the application of each.
 Remove the 4x hex bolts securing the original tail bracket from the underside, using an 8mm
socket, then gently lower and remove the bracket, as shown in picture 3.
 Remove the pair of bolts securing the original licence plate bracket to the block using an 8mm
socket and 10mm spanner, as shown in picture 4, then remove the bracket.
 Remove the nuts securing the original tail light to the block using a 10mm spanner, as shown in
picture 5, then remove the light.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301

FITTING INSTRUCTIONS

R&G Racing
www.rg-racing.com
LP0284BK
Picture 14
Picture 16
Email: info@rg-racing.com