Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
The motor of the turntable is electronically controlled by
the connected PS 800 unit (
). The toggle switch
➔ Fig. 10
on the right is for selecting the speed. Two speeds are
⅓
available: 33
rpm for long playing records and 45 rpm
for singles. The toggle switch on the left labelled ON/
OFF is to start or stop the motor.
To play a record the turntable is first started at the speed
desired. Then lift the tonearm by slowly pushing the lift
lever up and back. Release the tonearm from its rest
and position it above the lead-in groove or above the
desired piece/track to be played. Slowly bring the lift
Fig. 10
lever to the down-position whereupon the tonearm de-
scends smoothly.
This turntable does not feature any automatic end-of-
record shut-off facility. Therefore, as soon as the stylus
has reached the lead-out groove, the tonearm is to be
lifted up manually by the lever and the motor switched
off.
33
Publicité
Table des Matières
