Honeywell C8600A Guide Du Propriétaire page 17

Maintenance
Cleaning Your Alarm
CAUTION
Cleaning Chemical Hazard.
Can damage CO alarm.
Avoid using household cleaning agents,
paints, varnishes, or other chemicals.
Use only a vacuum cleaner or soft cloth.
NOTE: Keep your CO Alarm clean but do not
wash it with water or other household
cleaning agents.
To clean your device:
1. Remove it from the mounting bracket.
2. Use your vacuum cleaner hose to clean
the inside of your alarm; vacuum through
the openings around the alarm perimeter.
3. Wipe the outside with a cloth.
After cleaning your device:
1. Reinstall your alarm and test it using the
test button. (Testing your alarm each
week is recommended.)
2. Test your alarm each week and repair or
replace it, as needed.
17 69-1513EF—01