Publicité
STEP 2B- SECURE UNIVERSAL MONITOR PLATE VERTICAL RAILS
X2
STEP 2C - PRIOR TO EXTENDING ARMS REMOVE ARM ASSEMBLY FROM WALL PLATE
Prior to extending arms：
.
Remove 2 Inner Hex screws at top
of Arm Assembly.
.
Remove additional 2 screws at
bottom of Arm Assembly.
Note- 4 Hex screws will be used in Step
4 to reattach arm assembly to wall mount.
Secure vertical rails to horizontal
chrome rod on Monitor Plate with
pre-installed screws.
Remove Arm Assembly by gently
lifting vertically off Wall Plate
Plate is now ready to attach to wall surface
(Step 3).
P 6
. Wall
P 7
Publicité
