Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To modify the schedule:
1. Press the Pgm button. Each time you press the Pgm button, the thermostat
displays one of the periods of the schedule in the following order:
Weekdays
(MO TU WE TH FR)
1
2
3
2. Press the Hour and Min buttons to set the
start time of the displayed period.
NOTE: To cancel the period, press the Mode
button. Instead of displaying the start time of the
period, the thermostat will display --:--. During
operation, the thermostat will skip over that
period.
3. Press the Up or Down button to set the
temperature.
4. To set another period, press the Pgm
button and repeat steps 2 and 3.
5. Press the
button to return to normal
display.
Manual (Man) mode
To place the thermostat in Manual mode, press the Mode button
until Man appears on the screen. In this mode, any modification
to the temperature setpoint must be done manually. To set the
temperature, press the Up or Down button. The default setting is 70°F
(21.0°C).
Away mode
To place the thermostat in Away mode, press the Mode button until
Away appears on the screen. This mode is a quick way to lower the
temperature to a predetermined setting before you go away for
an extended length of time. The temperature is 59 °F (15.0 °C) by
default and can be modified using the setup menu (see page 7).
Standby mode
To disable heating, press the Mode button until Standby appears on the
screen. In this mode, the setpoint temperature cannot be displayed
or modified. For frost protection, heating will turn on only to prevent
the room temperature from dropping below 41 °F (5 °C).
Weekend
(SA SU)
4
1
2
3
4
6
M38829
am
Man
M38840
am
Away
M38841
am
Standby
M38842
Publicité
Table des Matières
