Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RX510
Quick Start Guide
The following steps describe the quickest method to get your pressure washer up and
running. However, it is essential you fully read this manual to ensure you are familiar with
the general safety features, precautions and functions necessary to operate the product.
Failure to do so may result in injury and damage to your washer or personal items.
Insert the cable tidy hook into the machine
Fit the handle by aligning the screw holes
1.
at the base of the handle to the top of the
washer unit. Tighten the two screws.
Fit the wheels by sliding the fitting into
2.
the sockets on the side of the washer until
they lock securely.
Slide the hose tidy onto the back of the unit.
3.
ASSEMBLY
En
1. Pressure cleaner
2. Water supply hose
3. Water connection
4. Water inlet
* No. 2, 3, 8 are not included
Attach the high pressure hose to the
1.
pressure water outlet of the machine.
Attach the spray gun to the high pressure
2.
hose. Prior to operating the machine
please ensure that the high pressure hose
has been completely uncoiled and do not
allow it to recoil during operation.
Mount the lance onto the spray gun and
3.
add your desired nozzle.
Connect the machine to the water supply
4.
hose and power supply.
Turn on water supply.
5.
Turn on washer after water has entered
6.
the unit.
© Wilks-USA
CONNECTION
5. High pressure hose
6. Water outlet
7. Spray gun
8. Power outlet
9. ON/OFF Dial
3
Publicité
Table des Matières
