Quick Start Guide - Wilks USA RX550i Mode D'emploi

RX550i

Quick start guide

The following steps describe the quickest method to get your pressure washer
up and running. However, it is essential you fully read this manual to ensure you
are familiar with the general safety features, precautions and functions necessary
to operate the product. Failure to do so may result in injury and damage to your
washer or personal items.
No.
1.
2.
3.
4.
5.
1. Attach the link hose to the hose reel and water outlet.
2. Connect the high pressure hose to the gun.
3. Attach the water hose to the water inlet (supply this washer with cold water only).
4. Connect one of the 5 coloured nozzles to the end of the gun.
5. Plug the washer into a power outlet.
6. Turn on water supply and hold the trigger on the gun until a constant stream of water flows.
7. Turn on the power to the unit.
8. Press the trigger on the gun to begin washing.
All manuals and user guides at all-guides.com
ASSEMBLY
9
Part
Pressure Washer
Water Hose (Not included)
Water Connection
Water Inlet
High Pressure Hose
© Wilks-USA
En
No. Part
6. Water Outlet
7. Gun
8. Power Outlet
9. Power Switch
10. Link Hose
10
3