Unit Shut Down - Wilks USA RX550i Mode D'emploi

RX550i

Unit Shut Down

1. Turn off the motor (push switch to the off position).
2. Unplug the unit from the power source.
3. Turn off the water supply.
4. Press the trigger of the gun to de-pressurise the
system.
5. Ensure that the unit and hoses are fully drained of
water.
6. Wipe all surfaces of the unit with a damp clean cloth.
7. Engage the gun safety lock.
Nozzles
0°Nozzle – Red (Fig.1): This nozzle delivers a pinpoint stream of pressurized water and is
extremely powerful. It should only be directed at surfaces that can withstand high pressure
such as metal or concrete.
15° Nozzle – Yellow (Fig.2): This nozzle delivers a powerful 15-degree spray pattern for intense
cleaning of small areas. This nozzle should only be used on areas and materials that can
withstand very high pressure.
Fig.1
25° Nozzle – Green (Fig.3): This nozzle delivers a 25 degree spray pattern for intense cleaning
of larger areas. This nozzle should only be used on areas that can withstand very high pressure.
40° Nozzle – White (Fig.4): This nozzle delivers a 40-degree spray pattern and a less powerful
stream of water. This nozzle can cover a wide area and can be used for most general cleaning
jobs.
Detergent Nozzle – Blue/Black (Fig.5): This nozzle is used to apply detergent and cleaning
solutions. This nozzle produces the weakest pressure of the three nozzles. Don't forget that you
can adjust the detergent flow using the dial on the front of the machine.
The nozzles are stored in receptacles on a panel mounted to the handle of the washer.
All manuals and user guides at all-guides.com
En
Fig.2 Fig.3
© Wilks-USA
Always turn
off the motor
before turning
off the unit's
water supply.
Failure to do so can
cause serious damage
to the motor.
Fig.4 Fig.5
4