Honeywell TURBO FORCE HYF500 Serie Manuel D'instructions page 5

OPERATION
• Be sure the fans are in the off position.
• Place your fan on a dry, level surface.
• Plug the power cord into a polarized 120-volt AC wall outlet, your fan is now ready to be used.
• To move the fan, turn the fans to OFF, unplug the unit from the wall outlet and pick the unit up
by the concealed handle located at the back of the top fan.
HYF500 FEATURES - MANUAL CONTROL
Individual controls allow you to operate each fan independently.
TOP FAN SPEED CONTROL
Turn the control knob to the desired fan speed High ( ), Medium ( ),
Low ( ) and off (Fig. 9).
BOTTOM FAN SPEED CONTROL
Turn the control knob to the desired fan speed: High ( ), Medium ( ),
Low ( ) and off (Fig. 10).
90° PIVOT
The adjustable pivot of the top fan head allows for you to angle the airflow
where you need it most. The top fan head also pivots to 90° allowing for
room air circulation (Fig. 11).
OSCILLATION
To activate the oscillation feature, press the oscillation ( ) button once.
Press the oscillation button again to turn the oscillation feature off. (Fig 10).
Top fan 90°
PIVOT
speed
control
Oscillation
button
Bottom
fan speed
control
Fig. 9 Fig. 10 Fig. 11
5