Castel XELLIP 500.5600 Mode D'emploi page 15

MASTER STATION WITH TFT DISPLAY
Backup and restoration of the system parameter
It is possible to backup and restore the complete configuration of the station (configuration, profiles, logical relations,
phone book...)
It is possible to restore the factory parameters by pressing 10s the button reset when the station is starting.
Update by TFTP
Updating software with TFTP can be very useful when several stations must be updated.
The station is looking forward a TFTP server which provides the available software release. If the station is concerned
by this update, it downloads it and flashes it independently.
The updating software takes place most of the time when the software release on the server is newer than the one
installed on the station.
It is possible to force an updating process to a specific release of the TFTP server.
The TFTP server can request the stations to reset the current configuration, so the data partition is cleared.
It is possible to configure the station to detect a new release when the station is starting or cyclically.
Backup on power failure
When a power failure occurs, the station must be able to backup the following:
✓
Counter values
✓
History
✓
Secured events (these events are defined in CASTELServeur)
✓
The states of interfaces
Historic function
The historic allows to visualize the events occurred on the station. Informations displayed are the date and time, the
events and a small description.
Datasheet n° 604-0001L www.castel.fr
FR
EN
Page 15 / 16