Publicité
Les langues disponibles
Les langues disponibles
Activate all valves into inflation position.
Fit the hose to the foot-pump.
To inflate your boat properly, the bottom side of
the foot-pump must rest on a flat ground
Pump evenly to inflate rapidly.
CAUTION
You can us the electrical air pump ACCESS (ask your Dealer).
TO INFLATE THE MAIN BUOYANCY TUBE
• Insert the pump hose end piece (add the correct connecting tip for the semi-recessed valve)
• Inflate (pressure = 240 mb ( 3.4 PSI ), reefer to PRESSURE section) making sure that each
compartment is equal. When correctly inflated, the internal bulkheads (a) are not visible.
NEVER COMPLETELY
INFLATE A
COMPARTMENT TO FULL
PRESSURE IF OTHER
COMPARTMENTS ARE
TOTALLY DEFLATED
Inflation is over: fit the valve caps tight (clockwise).
NOTICE :
INFLATION
.
DO NOT USE A COMPRESSOR OR A BOTTLE OF COMPRESSED AIR
50 %
1
100 %
2
A slight air-leak before screwing the valve caps is normal.
ONLY THE VALVE CAPS CAN ENSURE FINAL AIR TIGHTNESS.
a
100 %
0 %
50 %
100 %
4 / 7
0 %
50 %
100 %
Publicité
