Siemens VS08G Serie Notice D'utilisation page 30

Changing the dust bags and filters
32
All manuals and user guides at all-guides.com
Replacing the MEGAfilt
If the dust bag change indicator lights up brightly and
evenly when the floor tool is lifted from the carpet and
the highest suction power is selected, the dust bag
must be changed, even though it may not yet be full.
In this case it is essential to change the dust bag due
to the type of dust it contains.
Open the dust bag compartment lid by moving the
dust compartment locking lever in the direction of the
arrow.
Seal the MEGAfilt
self-seal tab and then remove the bag.
Insert a new MEGAfilt
holder and close the dust bag compartment lid.
!
Caution: the dust bag compartment lid will only
close when the MEGAfilt
textile dust bag is inserted.
If the dust bag change indicator is still lit after
the dust bag has been changed, please check
whether the nozzle, tube or flexible hose are
blocked.
® SuperTEX dust bag
® SuperTEX dust bag by pulling the
® SuperTEX dust bag into the
® SuperTEX dust bag or
de en