Kenmore 235.6152 Serie Guide D'utilisation Et D'entretien page 12

First Steps
Handle Style 3
To remove refrigerator handle:
(Handles may be easier to reverse while
doors are off.)
1. Remove two screws attaching handle
to top of refrigerator door.
2. Slide handle straight up and pull
handle off mounting screw on door.
3. Remove mounting screw from door
and install on other side, moving hole
plugs from corresponding holes to
opposite side.
To attach refrigerator handle:
1. Place top of handle over mounting
screw; pull handle straight down until
handle is aligned with screw holes on
top of door.
2. Secure top of handle with two screws
removed earlier.
To remove freezer handle:
(Handles may be easier to reverse while
doors are off.)
1. Remove two screws attaching handle
to bottom of freezer door.
2. Slide handle straight down and pull
handle off mounting screw on door.
3. Remove mounting screw from door
and install on other side, moving hole
plugs from corresponding holes to
opposite side.
4. Self-Adhesive Nameplate Models:
Use plastic putty knife to gently peel
All manuals and user guides at all-guides.com
To attach freezer handle:
1. Place top of handle over mounting
2. Secure bottom of handle with two screws
To reverse refrigerator/freezer handles:
Handles may be easier to reverse while
doors are off.
Reverse freezer and refrigerator handles
by inverting the handle removed from the
refrigerator door and attaching to the
freezer door. Invert the handle removed
from freezer door and attach to the
refrigerator door.
12
off nameplate from door and reapply
over old holes.
screw; pull handle straight up until
handle is aligned with screw holes on
bottom of door.
removed earlier.