Wlan Connection: Wireless Local Network; Additional Connections; Connecting Usb Devices; Inserting A Memory Card - Hama 00054810 Notice D'utilisation

g

WLAN connection: wireless local network

NOTE
You need a WLAN adapter to operate the device in a wireless network .
►
Configure the device as described in „WLAN setup" (p. 18) .
‹

Additional connections

Connecting USB devices

Switch on the device .
‹
Connect the devices with USB interface (keyboard, mouse, USB stick, external hard
‹
disk, WLAN adapter, . . .) to one of the USB connections (USB ports) (4) of the devices .

Inserting a memory card

Switch on the device .
‹
Insert the memory card (e .g ., SDHC (up to 32 GB, MMC) into the SD card slot (7) on
‹
the right side of the device with the labelled side facing backwards .

Connecting to a home cinema system

Connect the digital optical output with the help of a fibre optic cable (TOSLINK
‹
coupling) to a home cinema system for high-quality audio transmission .

Startup

Inserting batteries into the remote control

Open the cover of the battery compartment on the back of the remote control .
‹
Place the two AAA batteries supplied into the battery compartment and pay attention
‹
to the correct polarity .
Close the cover of the battery compartment again .
‹
NOTE
Change the batteries if the range of the remote control decreases or if the device no
►
longer reacts to all commands .
44
Startup
Internet TV Box