Removing The Infant Carrier Adaptors; Removing The Travelsystem Adaptors - KIDDY evocity1 Guide D'utilisation

EN
To remove the KIDDY infant carrier push both handle buttons and pull the handle
back in the upright position.
WARNING
Ensure that both handle buttons are engaged.
Now the infant carrier can be removed from the adaptors by simultaneous
pushing of release buttons at both sides of infant carrier.
For car seats used in conjunction with a chassis, this vehicle does not replace a
cot or a bed. Should your child need to sleep, then it should be placed in a suita-
ble pram body, cot or bed.

5.4 Removing the infant carrier adaptors

Hold and push the removing button on the travelsystem adaptor pushed (fig. 22,
no. 1) and pull out the infant carrier adaptor (fig. 22, no. 2).
Remove the second infant carrier adaptor in the same manner.

5.5 Removing the travelsystem adaptors

Push the opening button on the travelsystem adaptor upwards (fig. 23; no. 1) and
open the flap (fig. 23; no. 2). Afterwards detach the travelsystem adaptor from the
chassis (fig. 23; no. 3).
Remove the second adaptor in the same manner.
35 35
All manuals and user guides at all-guides.com