Opening The 5-Point Belt System; Width Adjustment Of The 5-Point Belt System And Securing The Child; Height Adjustment Of The Shoulder Belts - KIDDY evocity1 Guide D'utilisation

All manuals and user guides at all-guides.com
Always use the 5-point belt system as described
below when you use your Evocity 1 with seat
unit.

4.1 Opening the 5-point belt system

Push the button in the middle of the buckle (fig. 13; no. 1) and the buckle tongues
will come outwards (fig. 13; no. 2).

4.2 Width adjustment of the 5-point belt system and securing the child

Place your child in the seat unit, put the shoulder belts over childs shoulder and
the buckle between the legs. Push the buckle tongues into the buckle and ckeck
if it is closed.
The belt system can be adjusted by sliding the 5 belt adjusters in the desired
direction (fig. 14).
WARNING
The belt system is adjusted correctly when the
belts lay firmly on the childs body.

4.3 Height adjustment of the shoulder belts

Push the plastic clip on the backside of the backrest through the hole to the front
(fig. 15; no. 1).
Do the same on the second side.
Now insert the plastic clip into the hole at the required height (fig. 15; no. 2).
The plastic clip must lay flat on the backside of the backrest.
To secure children from 0 up to 6 months by the harness system, thread before
the 2 shoulder belts through the 2 loops (fig. 16) and recline the backrest to the
lowest position. (fig. 11, pos. d)
EN
32 32