Adjustment Of The Parking Brake; Adjustment Of The Reclined/Upright Position; Adjustment Of The Footrest; Securing The Child With The 5-Point Belt System - KIDDY evocity1 Guide D'utilisation

EN

3.7 Adjustment of the parking brake

To set the parking brake push the brake levers on both sides downwards (fig. 10;
"STOP").
WARNING
Don't let go of the stroller until you are sure that
the parking brake is fully engaged.
To loosen the brake push the brake levers upwards (fig. 10; "GO").

3.8 Adjustment of the reclined/upright position

To change the reclining position, pull the adjust button upwards (fig 11; no.1), then
change the position of the back rest (fig 11; No. 2). Loosen the button then (fig 11;
no. 3) so that the back rest is fixed in one of the 4 possible positions (fig 11; a-b-c-
d). The most reclined position (d) is intended to use for new born babies.

3.9 Adjustment of the footrest

Pull the buttons on the left and right side of the footrest forwards (fig. 12; no. 1)
and adjust the footrest to the desired position (fig. 12; no. 2).
WARNING
After adjustment make sure that both buttons
are engaged.

4. Securing the child with the 5-point belt system

WARNING
Avoid serious injury from falling or sliding out.
31 31
All manuals and user guides at all-guides.com