Appendix; Specifications; Supplied Accessories For Pt-E06 - Olympus PT-E06 Mode D'emploi

7. Appendix

Specifications

Available models
Pressure
resistance
Main materials
Dimensions
Weight
* We reserve the right to change the external appearance and the specifications without notice.

Supplied accessories for PT-E06

O-ring (for back lid): POL-E06A
O-ring (for front lid): POL-E06B
Silicone grease: PSOLG-2
Silica gel: SILCA-5S
LCD hood: PFUD-E06
Camera stand: PTMO-E05
Hand strap: PST-E02
Body cap: PBC-E02
TTL connector cap: PTAC-E04
En
EN 25
Olympus Digital Camera E-620
Depth of down to 40 m (130 feet)
Main body: Polycarbonate resin.
Open/close dial/release lever/power switch dial/mode dial/control dial/zoom dial/
camera table: Polycarbonate resin.
Port mount/pickup viewfinder frame/optional bracket mount/zoom dial gear/TTL
connector cap: Aluminum.
Axis of operation buttons/hand strap ring: Stainless steel.
Body cap: ABS resin.
O-rings/LCD inner hood: Silicone rubber.
LCD hood: NBR rubber.
Width 208.0 mm x height 169.0 mm x depth 144.0 mm
1,340 g (camera and accessories not included)