R&G LP0198BK Instructions page 8


If fitting R&G Mini Indicators with bulbs, the black wire on the Mini Indicators connects with the black wire on
the CON0009 and the black/white wire on the Mini Indicators connects with the red wire on the CON0009.

If fitting R&G LED Mini Indicators, the black wire on the Mini Indicators connects with the red wire on the
CON0009 and the black/white wire on the Mini Indicators connects with the black wire on the CON0009. 1x set
of RGR0001 & RGR0002 resistors (mounted inline) (available separately) are required to achieve the correct
flash rate.
Page | 8

Connect each connector up to the OEM wiring and check for the correct operation of all lights.

Neatly secure the wiring within the tail unit using the cable ties supplied.

Re-fit the pillion seat.

Ensure the tail tidy is securely mounted and all bolts are fully tightened.

Re-fit the licence plate (it may require drilling).

Depending on local laws, attach enclosed reflector in an appropriate location.

Test the licence plate illuminator and all lights before riding.
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
ISSUE 1 09/05/2016 (AR)
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
R&G Racing
www.rg-racing.com Email: info@rg-racing.com