Additional Functions Of The Ql320Hvv - OBL QL320 Série Mode D'emploi

Additional functions of the QL320HVV:

Description:
The QL320HVV offers additional functions:
- 3 different rotor head speeds
- Permanent laser spot
- Scan function (line marker) of the rotor head with 4 lengths
- All functions available with the dual mode IR remote control
Rotor head functions:
Rotation / Scanning:
The QL320HVV will start with the rotation speed
of 600 rpm. The rotation can be stopped with the
illustrated key. It will give a permanent spot.
Pressing the button again will change to scanning
mode. The laser starts with a short scanning line.
Each further press will increase the scanning
length and afterwards rotating will start again.
Using the RC320 remote control:
The RC320 can control all functions of the QL320HVV. It
has a second mode level.
Especially the manual slope function of the laser plane is on
the second mode to avoid unintentional use.
LED Indications:
The green LED on the right side flashes when a key is
pressed and the RC is sending. This LED will lit red when
the batteries are empty.
The left LED is off in normal mode and will lit red when the
second mode is active.
29