Recharge Instrument - OBL QL320 Série Mode D'emploi

Recharge Instrument

(only rechargeable version)
The rechargeable instruments of the QL320 contain NiCd batteries.
For recharging connect the charger to the battery chamber. The charging
LED is lit red during active charging process. The LED will change to green
when the process is finished. The instrument can be charged while using the
laser.
The included dual charger charges simultaneously the instrument QL320 and
the receiver QL314. The charging status is indicated by a green LED. The
receiver turns off automatically while charging.
The integrated NiCd-batteries are charged under microprocessor control.
Overcharging or a memory effect is avoided.
Charging time QL320: max. 4.5 hours
Charging time QL314: max. 1.5 hours
Use the charger only inside dry rooms !
Indication of charging status:
LED red:
LED green:
If a replacement of the rechargeable batteries is necessary, you can remove
the battery chamber with a hexagon screwdriver.
USE ONLY RAPID RECHARGEABLE BATTERIES (SINTER CELLS) WITH
MIN. 5AH CAPACITY !
ASK YOUR DEALER IN CASE OF DOUBT !
Warning:
NEVER PLACE NON RECHARGEABLE BATTERIES IN THE
ACCUMULATOR CHAMBER !
BATTERIES MAY EXPLODE IN CASE OF A DEFECTIVE SAFETY
SWITCHING AND TRYING TO RECHARGE !
Charging
Charging finished
25