Safety Instructions; Laser Safety - OBL QL320 Série Mode D'emploi

Safety Instructions

Laser Safety

The laser instruments QL320 H,HS,HV are laser class 2, the type HVV is
laser class 3R according to EN 60825-1:2001-11. Follow the instructions on
the warning labels which are shown in the following illustration:
QL320H/HS: 650nm
QL320HV: 635nm,
Laser Power: 1mW / 600 min ¯¹
Laser Class 2
IEC 60825-1 2001.11
Do not remove the attached warning labels. The manufacturer and its dealers
are not liable for any defects and its consequences from this removal.
! Attention ! The internal laser source complies to laser class 3B. Do not
disassemble the instrument. In case of inappropriate repairs laser radiation
can arise outside of the marked labels. For that the responsible can be made
liable in case of any damage. In case of inappropriate processing
malfunctions are possible also without external viewable damages.
Use the charger only in interiors!
Avoid to use the charger with current generators, as over voltage may
damage the charger.
CE-marking (European regulation):
The instrument QL320 including accessories complies with the regulations of
permission for low voltage and electromagnetic compatibility.
Attention: This instrument contains nickel cadmium batteries. Nickel cadmium
batteries must be recycled or disposed properly (WEEE-Reg.-No. DE
23874031).
LASER RADIATION
DO NOT STARE INTO THE
BEAM
LASER CLASS 2
QL320HVV: 635nm
Laser Power: <5mW
Laser Class 3R
IEC60825-1 2001.11
23