LG 32LD550 Manuel Du Propriétaire page 23

Masquer les pouces Voir aussi pour 32LD550:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AD-hoc Mode
This is the method of communicating directly with the machine to communicate without AP.
This is the same as connecting two PCs with a cross cable.
Selecting the wireless network setting type
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꕉ Previous
Network Status
Adhoc network is connected.
TV
(LGTV10)
Signal Strength
Mac Address : 00:00:13:64:23:01
IP Address
: 10.19.152.115
Gateway
Subnet Mask : 255.255.254.0
Gateway
: 10.19.152.1
Setting
Test
1
Repeat step 1-3 on P.21.
2
Select Setting AD-hoc network.
ENTER
3
ENTER
ENTER
4
Select Connect to connect Ad-hoc network.
ENTER
You can see the Network ID and Security Key
on your TV screen.
Enter this Network ID and Security Key to
your device.
If a network may not operate, change the
setting information using the RED button.
Setting Ad-hoc network
Features using exiting network can be unavailable. Do you
want to change network connection?
Enter
ꔉ Next
ꕉ Previous
Exit
Network Setting
Insert the IP address.
IP Mode
ꔈIP Address
ꔈSubnet Mask
ꔈGateway
ꔈDNS Server
Close
ꕉ Previous
PC Setting
Internet Protocol(TCP/IP) of PC needs to be set
manually.
IP address, Subnet Mask, and default Gateway
can be set with your own discretion.
i.e) IP address: 192.168.0.1 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.10
TV Setting
Verify IP address and gateway of PC.
Input Gateway address of PC to IP Address, and
IP Address of PC to Gateway, and select Enter.
i.e) IP address: 192.168.0.10 / Subnet Mask:
255.255.255.0 / default Gateway: 192.168.0.1
Select Enter.
Setting Ad-hoc network
Insert the setting information into the device.
Cancel
ꔉ Next
Exit
Setting Ad-hoc network
Insert the setting information into the device.
IP Manual Setting
192 . 168 . 0 . 10
255 . 255 . 255 . 0
192 . 168 . 0 . 1
255 . 255 . 0 . 0
Enter
Example of the PC setting that
supports a wireless network
Exit
1. Find a wireless network device in
your PC.
2. Select LGTV10 that appears in
the list. (Select the same name
as the network ID that appears
on your TV screen.)
3. Type 1111111111 in the Inserting
the security key dialog.
(Type the security key that
appears on your TV screen.)
5
Insert the IP address.
ENTER
6
Network setting is completed.
ENTER
Select Close.
Network ID(SSID) : LGTV10
Security Key : 1111111111
ꔅ Changing the setting information.
Connect
ꔉ Next
ꕉ Previous
Exit
Network ID(SSID) : LGTV10
Security Key : 1111111111
Connecting the Ad-hoc network
Cancel
23

Publicité

Table des Matières
loading

Table des Matières