LG 32LD550 Manuel Du Propriétaire page 22

NETWORK
When a security code is already set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or router with PIN, use this feature.
Selecting AP
Select AP you want to connect.
Input the new SSID
iptime
ASW
Network1
ꔅ Connecting with PIN mode
ꕉ Previous
1 Repeat step 1-6 on P.21.
2
Connect the acccess point with PIN
RED
mode.
3 You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
Simple setting (WPS-button mode)
If your access point or wireless router that supports PIN or WPS (Wi-Fi Protected Setup), it's available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꕉ Previous
1 Repeat step 1-4 on P.21.
2
ENTER
22
Page 1/1
Access Point
Search
ꔉ Next
ꕯ Exit
ꔉ Next
ꕯ Exit
Select Simple setting (PBC
mode).
Connecting with PIN mode
Insert PIN number at the AP webpage and
press 'Connect' button.
PIN NUBMER : 12345670
Connect
For more information, check the AP manual.
ꕉ Previous
4
Select Connect.
ENTER
Repeat step 4-5 on P.18.
5
ꔛ
PIN number is the unique 8 digit number
of the dongle.
Simple setting (WPS-button mode)
Press PBC Mode button of AP and press 'Connect' button.
Connect
Caution: Check if PBC mode button is available for your AP.
ꔉ Next
ꕉ Previous ꕯ Exit
3
Select Connect.
ENTER
Repeat step 4-5 on P.18.
4
ꔉ Next
ꕯ Exit