Lionelo Dani Manuel De L'utilisateur page 8

the manufacturer.
If you equip the product with a sling, through special adapters,
15.
which may also be used as a child safety seat, remember it
cannot substitute the crib. If the child needs to sleep, put it
in a suitable crib.
Use only spare parts delivered or recommended by the
16.
manufacturer/distributor.
Keep the product away from fire and sources of heat.
17.
Do not use the product on stairs.
18.
Stroller parts list (fig. A, B)
1.
Sunshade
2.
Handle
2a. Handle adjustment key
3.
Bow release key
4.
5-point harness
5.
Footrest adjustment key
6.
Front wheel release key
7.
Front wheels
How to assemble and disassemble stroller
1.
Stroller frame unfolding: open the unfolding lock (10) and then pull
the handle up until you can hear a click (fig. 2).
2.
Place the seat on the stroller frame (fig. 1a). Unfold and secure the seat with a bow
until you can hear a click. Correct assembly of the seat on the frame is signaled
by the click. Make sure the seat has been properly mounted in the stroller frame.
3.
To remove the seat from the stroller frame, press the release key on both
sides of the seat and then lift them (fig. 1b).
4.
To assemble the seat in a rear-facing position (fig. 1c), press the release key
and then lift the seat and place it in a desired position. The seat is properly
mounted when you can hear a distinctive click.
5.
To remove the sunshade, unzip it and then pull up plastic elements on both
sides (fig. 1d).
6.
To remove seat covering, unzip it around footrest and under the seat, and
unzip belts at the base of the seat.
EN
8.
Basket
9.
Backrest adjustment lever
10. Folding lock
11. Locking mechanism
12. Rear wheel release key
13. Rear wheels
14. Swivel wheel lock key
‑ 8 ‑