Méthodes D'authentification Ieee 802.1X - Brother PJ-822 Guide De L'utilisateur

Masquer les pouces Voir aussi pour PJ-822:
Table des Matières

Publicité

Accueil >
Sécurité
>
d'authentification IEEE 802.1x
Méthodes d'authentification IEEE 802.1x
Modèle associé: PJ-883
EAP-FAST
Le protocole EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling)
développé par Cisco Systems, Inc., utilise un nom d'utilisateur et un mot de passe pour l'authentification et
des algorithmes à clé symétrique pour réaliser un processus d'authentification en tunnel.
Votre appareil Brother prend en charge les méthodes d'authentification interne suivantes :
EAP-FAST/AUCUN
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
PEAP
Le protocole PEAP (Protected Extensible Authentication Protocol) est une version de la méthode EAP
développée par Cisco Systems, Inc., Microsoft Corporation et RSA Security. PEAP crée un tunnel SSL
(Secure Sockets Layer)/TLS (Transport Layer Security) entre un client et un serveur d'authentification pour
l'envoi d'un nom d'utilisateur et d'un mot de passe. PEAP fournit une authentification mutuelle entre le serveur
et le client.
Votre appareil Brother prend en charge les méthodes d'authentification interne suivantes :
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS
Le protocole EAP-TTLS (Extensible Authentication Protocol-Tunneled Transport Layer Security) a été
développé par Funk Software et Certicom. EAP-TTLS crée un tunnel SSL de cryptage semblable à PEAP
entre un client et un serveur d'authentification pour l'envoi d'un ID d'utilisateur et d'un mot de passe. EAP-
TTLS fournit une authentification mutuelle entre le serveur et le client.
Votre appareil Brother prend en charge les méthodes d'authentification interne suivantes :
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-CHAPv2
EAP-TTLS/PAP
EAP-TLS
Le protocole EAP-TLS (Extensible Authentication Protocol-Transport Layer Security) nécessite
l'authentification d'un certificat numérique par un client et par un serveur d'authentification.
Information associée
Utiliser l'authentification IEEE 802.1x pour un réseau sans fil
Utiliser l'authentification IEEE 802.1x pour un réseau sans fil
> Méthodes
136

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pj-823Pj-862Pj-863Pj-883

Table des Matières