Latchways PRD Mode D'emploi page 3

MSA Latchways
certificate of conformity
Latchways serial number
1
We certify that this item has been inspected and conforms to the full requirements and specifications of the
3
relevant standards (tick applicable box):
EN 341: 2011
The quality control arrangements adopted in respect of this item conforms to the conditions of EN ISO 9001:2008.
Issue date: dd / mm /
Signed/(inspection stamp):
4
Manufactured by
Latchways plc
Hopton Park
Devizes
Wiltshire
SN10 2JP
United Kingdom
Tel: +44 (0) 1380 732700
Fax: +44 (0) 1380 732701
email: info@latchways.com
www.latchways.com
Disclaimer
Every effort has been made to ensure that the information contained within these user instructions
is both accurate and current. As part of Latchways' continuous improvement programme changes
may be made to the product after the publication date. Therefore, occasionally, the product and
these instructions may slightly differ.
Warranty details
Latchways warrants the Latchways PRD descender device, excluding auxiliary components,
against defects in materials and workmanship for one year from the date of the original purchase
by the consumer. This warranty applies to the decender device only. Refer to Approved harness
Manufacturer's instructions for Approved harnesses' warranty. Full terms and conditions can be
found at www.latchways.com/warranty.
PRD descender device
® ®
EN 361: 2002
yy Place: Devizes, UK
Attestation of conformity
Notified Body number 0321
SATRA Technology Centre Ltd
Wyndham Way, Telford Way,
Kettering, Northamptonshire,
NN16 8SD
United Kingdom
Tel: +44 (0 )1536 410000
Date of manufacture:
2
EN 358: 1999
Production control phase
Notified Body number 0194
INSPEC Certification
Services
56 Leslie Hough Way
Greater Manchester
M6 6AJ
United Kingdom
Tel: +44 (0)1617 370699
No part of this document may be reproduced or
transmitted in any form or by any means, without prior
permission in writing from Latchways plc.
EN
dd / mm / yy
3