Vesa Panel Installation To The Monitor - ONKRON G80 Mode D'emploi

2.

VESA panel installation to the monitor

Use M-A or M-B screws depending on the VESA hole size of the monitor. Use
the key (J) to screw the appropriate screws М-А or М-В and washers М-С
into the upper VESA holes of the monitor, without turning 3 mm (0.11") to
the surface of the monitor:
VESA 100
џ Carefully install the monitor onto the
arm so that the screwed-in screws fall
into the upper grooves of the VESA
panel.
џ Fix the screen to the lower holes of the
VESA panel with the two remaining
screws М-А or М-В and washers М-С
using the key (J).
VESA 75
UP
M-C
J
M-A
M-B
J
M-A
M-B
M-A
UP
M-B
M-C
7