Philips AVENT SCF304/60 Mode D'emploi page 17

Using your Electronic Pump as a
Manual Breast Pump
Your Twin Electronic Breast Pump can also be used
as a single manual pump. In this case, you simply
need to replace the control handle or double pumping
connector and silicone diaphragm with the
3 manual pump parts provided (u, v and w).
Assembling your Manual
Breast Pump
Ensure you have disassembled, washed
and sterilised all the parts.
As before in diagram D 1, 2, 3, 5, but this time:
6. Place the silicone diaphragm with the stem
(w) into the pump body (d), making sure it fits
securely around the edge, to create a seal.
(This is easier if the diaphragm is wet.)
7. Position the forked end of the handle (v) under the diaphragm stem (w)
and push down gently on the handle until you hear it 'click' into place.
8. Click the pump cover (u) onto the pump body (d).
How to use your Manual Breast Pump
1. Press the Let-down Massage Cushion firmly against your breast to
create a perfect seal.
2. Gently squeeze the handle 5 or 6 times fairly quickly to initiate let-down.
3. When you see your milk beginning to flow, establish a rhythm of pumping
to meet your own comfort level.
(see diagram H)
(see diagram I)
16