Philips sonicare ProtectiveClean 4500 Serie Mode D'emploi page 16

16
English
Brush head replacement reminder
Pressure sensor
- Triple tone of high-med-low means the
EasyStart feature has been deactivated.
The brush head replacement light and
battery light will also blink amber 2 times
in unison to confirm deactivation.
Note: To achieve clinical efficacy, EasyStart
needs to be deactivated.
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button
while the handle remains on the charger.
3 Keep the power on/off button pressed until
you hear a series of two short beeps (after
4-5 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the
Brush head replacement reminder
feature has been activated. The brush
head replacement light and battery light
will also blink green 2 times in unison to
confirm activation.
- Triple tone of high-med-low means the
Brush head replacement reminder
feature has been deactivated. The brush
head replacement light and battery light
will also blink amber 2 times in unison to
confirm deactivation.
1 Put the handle on the plugged-in charger.