Table des Matières
Publicité
_IA_MT100.book Seite 23 Freitag, 28. Mai 2010 9:04 21
MagicTouch MT100
6.2
Determining the installation location for the control unit
Select the installation location for the control unit:
in the vehicle interior,
not in areas where strong electrical fields could cause interference, e. g. ignition
cables or central control electronics,
not in the immediate vicinity of other control units, in order to prevent the
devices from interfering with each other (which could cause malfunctions and
reduce the range of the radio remote control),
not directly next to ventilator nozzles.
7
Installing MT100
See fig. 4
➤
Screw the control unit firmly to the vehicle with the screws supplied (B) or use
double-sided adhesive tape (A).
8
Connecting MT100
8.1
Connecting MT100 to the power
See fig. 5
No.
Designation
1
Indicator relay
2
Status LED (accessory)
3
Right-hand indicator
4
Left-hand indicator
The control unit has the following connections:
Terminal
Connection
1
Antenna
2
(not assigned)
3
Status LED (accessory)
4
(not assigned)
5
Earth, terminal 31
6
Ignition, +12 V, terminal 15
7
Central locking activation time
Terminal
Connection
8
Left-hand indicator
9
Battery, +12 V, terminal 30
10, 11, 12
Closed
13, 14, 15
Open
16, 17
(not assigned)
18
Right-hand indicator
Installing MT100
23
Publicité
Table des Matières
