Installing The Water Line - Samsung RFG237 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLING THE WATER LINE

Connecting the water supply line to the refrigerator.
There are several items that you need to purchase to complete this connection.
You may fi nd these items sold as a kit at your local hardware store.
Use Copper Tubing
¼" copper tubing
¼" compression nut (1pc)
Ferrule (2pc)
1. Connect the household water line to the assembled compression fi tting.
- If you are using copper tubing, slip the compression nut
copper tubing (not supplied) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the
compression fi tting.
Do not use without the molded end(Bulb) of the plastic tubing .
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,
leak-free connection.
Installing the water fi lter.
After remove the right side upper shelf, you can install the
water fi lter more easily.
1. Remove the water fi lter cover (
2. Remove the fi xed cap (
the cap in a safe place for later use if you don't use the fi lter.
3. Remove the water fi lter (
replacement indicator sticker (Indicator sticker is included in
the box) on the fi lter as shown. Place the sticker on the fi lter
that dates six months in the future. For example, if you install
the water fi lter in March, put the "SEP" sticker on the fi lter
to remind you to replace it in September. This way, you can
remember the time to replace the water fi lter. Normally, a fi lter
life is about 6 months.
DA68-01827C-17.indb 19
DA68-01827C-17.indb 19
Use Plastic Tubing
¼" plastic tubing
Molded end(Bulb)
¼" compression nut (1pc)
onto the compression fi tting. Do not over-tighten the compression nut .
)
1
) by turning it counter clockwise. Keep
2
) from the box and put a
3
Refrigerator
Compression
Nut (1/4")
(Assembled)
Ferrule
(Not supplied)
Copper tubing
or
Plastic tubing
(Not supplied)
(Not supplied)
Household water supply line
(not supplied) and ferrule (not supplied) on
2
Plastic Tubing
(Assembled)
Compression Fitting
(Assembled)
Molded end(Bulb)
Compression nut
(1/4") (Not supplied)
1
3
Indicator sticker
(month indicator)
Setting Up _19
2014. 5. 14.
2014. 5. 14.
10:02
10:02

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rfg238 serie

Table des Matières