Assemble The Freezer Drawer - Samsung RFG237 Serie Mode D'emploi

Setting up your French Door Refrigerator

ASSEMBLE THE FREEZER DRAWER

1. Pull out the rails fully on each side of the cabinet.
2. Attach the freezer door front onto the open slots on the sides.
3. Tighten 4 hex head bolts completely with a socket wrench (10mm).
4. Insert the lower basket (
5. Hook the ends of the tilting pocket (
push down until they are locked into place.
6. Insert the upper drawer.
Remove 2 pieces of tape
Reattach the tape in the same position when moving the refrigerator to
prevent scratching the drawer bin.
14_ setting up
DA68-01827C-17.indb 14 DA68-01827C-17.indb 14
) into the rail system.
6
) onto the brackets and
7
( )
9 attached to the side of the drawer bin.
Slot
Slot
Slot
Slot
6
7
8
9
2014. 5. 14. 2014. 5. 14. 10:02 10:02