Troubleshooting; Fuse Information - Memphis ITC 3 IntelliBurn Technology Elite Cart Mode D'emploi

Troubleshooting and Error Messages Continued
Problem
Grill Will Not Achieve Grill isn't receiving sufficient fuel.
Or Maintain Stable
Temperature
Grill isn't receiving sufficient air-
flow.
Burn-pot is overloaded with ash build-
up.
Frequent Flare-ups are Flammable material build-up.
experienced
Unbalanced airflow throughout the
Cooking temperatures
grill.
are uneven
Power Cable (VG1969) Fuse

VG9021– Fuse Glass 250VAC 5A 5 x 20 mm
Cause
Check the hopper for sufficient fuel.
Ensure both sides of the hopper are filled.
Verify that auger motor is rotating.
Check to see if blower have been unplugged or have failed.
Contact dealer or Memphis Grills directly in case of blower failure.
Check the burn pot for ash build-up or other obstructions.
Check to see if blower have been unplugged or have failed.
Clean out ash drawer and scrap grease off Savorizer®
Ensure that Savorizer® is installed correctly

Fuse Information

Antenna Jack
Connector
Solution
4A SLO-BLO Fuse
MicroSD
(VG0332)
0.5A SLO-BLO Fuse
(VG0331)
Logic Board Layout
12A SLO-BLO Fuse
(VG0333)
36