Hendi 212165 Mode D'emploi page 7

Cleaning and maintenance
Attention: Always unplug from the electrical power supply outlet and let it cool down completely before clean-
ing and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problems
The appliance is con-
nected to the power sup-
ply but the heating indi-
cator does not light up.
The appliance does not
heat up but the heating
indicator light up.
Technical specification
Item no.
Operating voltage and frequency
Rated input power
Temperature setting
Protection class
Waterproof protection class
Net weight (approx.)
Dimension
Remark: Technical specification is subjected to change without prior notification.
Possible causes
Power plug is not connected properly
to the electrical power supply outlet.
Heating indicator defective.
Hi-limiter (thermal cut-out) acti-
vates.
Temperature control knob defective
Heating element defective
212165
1750W
10,5kg
310x395x(H)230mm
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the appliance as it
may damage the appliance.
Possible solutions
Check again to make sure it is
connected properly.
Contact the supplier.
RESET the Hi-limiter [See = = > RE-
SET the Hi-limiter (thermal cut-out)]
Contact the supplier.
Contact the supplier.
220-240V~ 50/60Hz
50°C ~ 220°C (MAX)
Class I
IPX3
212189
1550W
10kg
390x335x(H)230mm
EN
7