Hendi 212165 Mode D'emploi page 5

Masquer les pouces Voir aussi pour 212165:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
• Do not wash the appliance with water. Washing can cause leakages and increase the risk
of electric shock.
• Do not clean or store the appliance unless it is completely cooled down.
Intended use
• This appliance is intended for professional use.
• This appliance is intended for making waffle only.
Any other use may lead to damage of the appli-
ance or personal injury.
Grounding Installation
This appliance is classified as the protection class I
and must be connected to a protective ground.
Grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
Main parts of the appliance
1. Handle
2. Baking plates (Upper & lower)
3. Drip tray (212189 only)
4. Timer, 0-15mins
5. Heating indicator (Orange)
6. Temperature control knob, 50°C ~ 220°C (MAX)
7. ON/OFF switch
8. RESET button (at the back)
Remark: The content of this manual applies for
212165 and 212189 unless specified otherwise. The
outlook and appearance may vary from the shown
illustrations.
Preparations before using for the first time
• Unpack the appliance carefully and remove all
protective packaging and wrapping. Make sure
no packaging debris remains on the appliance.
• Check delivery contents for any missing parts
and any possible transport damage. In the event
of damage in transit or missing parts, DO NOT
use the appliance and contact your supplier im-
mediately.
• Place the appliance on a horizontal, stable and
heat resistant surface. Leave at least 20 cm of
space around and above the appliance.
• Operating the appliance for any other purpose
shall be deemed a misuse of the device. The user
shall be solely liable for improper use of the de-
vice.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly in-
stalled and grounded.
1
2
3
4
5
• Let the appliance heat up for few minutes at the
highest temperature setting (--> Operation) to
remove all residues from the manufacturing pro-
cess. It may also emit some odour for the first
few cycles. This is normal and does not lead to
defect or hazard.
• Let the appliance cool down completely before
cleaning to use it again.
• Keep the packaging if you intend to store your ap-
pliance in the future.
8
6
7
5
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

212189

Table des Matières