Exit MSP-30107-V01 Mode D'emploi page 8

2). Connect power to the heat pump and press the ON/OFF button on the control
panel. The heat Pump will start up after the time delay expires (see below).
3). After a few minutes, check whether the air blowing out of the unit is cool (The
mini heat pump can only make heating, when starts up, the running mode is heating
as default).
4). When turn off the water pump, the unit should also turn off automatically.
Depending on the initial temperature of the pool water and ambient air temperature,
it may take long time to heat the water to your desired temperature. An appropriate
9
MSP-30107-V01