Failures Declarations; Assistance Or Service - Bertazzoni 30 Série Manuel D'utilisation Et D'entretien

Failures declarations

The control is managing an error detection system, mainly the checking the functionality of the electronics
itself (keyboard functionality, ambient light conditions, communication between the two boards and the
working temperature of the control).
As soon as a failure is detected, the control stops all the heating elements and declares the error code,
showing on the proper display "F" and a second letter alternatively in order to identify the fault cause (see the
table below).
"Fc" Allow the cooktop cool down.
"FA,FC,FJ,FL,FU,Fb" In case of k eyboard or ke y errors, be sure that n o objects, d irt or fluids are
overlapping
the commands. Try to remove the power and the restore it. If the problem persist call service.
In case of other control errors, remove and the restore the mains power. If the problem persist call service.
Before calling for assistance or service, please
check "Troubleshooting." It may save you the cost
of a service call.
If you still need help, follow the instructions below.
When calling, please know the purchase date and
the complete model and serial number of your
appliance.
This information will help us to better respond to
your request.

ASSISTANCE OR SERVICE

17
Service Data Record
For authorized service or par ts information
see paragraph "BERTAZZONI for
Home Appliances".
The location of the serial tag is below the cooktop
box. Now is a good time to write this information in
the space provided below. Keep your invoice for
warranty validation.
Model Number _____________________
Serial Number ______________________
Date of Installation or Occupancy ______________