Maintenance - Cartrend 146000 Notice D'instructions Originale

Caution! When inserting the battery block, make
sure that the notch lines up with the guide rail and
that the notches on the battery block are in the right
place. Incorrect insertion of the battery block can
cause damage to components.

MAINTENANCE

Warning: When servicing the device, only identical
replacement parts may be used as otherwise danger
and damage may be incurred.
Do not misuse any tools. Misuse may lead to dam-
age to the tool or the workpiece.
Warning: Before mounting parts, making settings,
cleaning or when the electric power tool is not in
use, always remove the battery block. This is to pre-
vent the tool from starting up unintentionally.
Do not use any solvents for cleaning purposes.
WARNING: Do not allow any chlorine-based solvent,
petrol or penetrating oil to come into contact with
plastic materials. Many detergents contain chemical
substances that may corrode the plastic parts of the
device.
Warning: Do not attempt to modify the tool or use
accessories or auxiliary devices that are not listed
in the instructions for use. Such changes or modifi-
cations constitutes misuse and may jeopardise the
user.
Warning: Wear protective goggles when using
compressed air to clean the tool. Wear a breathing
mask when carrying out work that causes dust.
24
146000_Schlagschrauber_BAL_191210.indd 24 146000_Schlagschrauber_BAL_191210.indd 24
All manuals and user guides at all-guides.com
Battery block
To extent battery life, we recommend:
· Do not charge or store at high temperatures.
Temperatures under 10° C or over 38° C shorten
battery life.
· Never store batteries in uncharged state.
· All batteries slowly loose their charge. The higher
the temperature, the quicker they discharge.
If you store the tool for a protected period, charge
the battery block every one or two months. This
will extend battery life.
Remarks: Your tool contains lithium-ion batteries.
Dispose of then in an environmentally compatible
way or take the batteries to a certified service
provider for recycling.
REMOVING AND PREPARING THE BATTERING
BLOCK FOR DISPOSAL
WARNING: Never attempt to open the battery pack.
Do not transport the additional battery pack in a
bag or toolbox together with other metal objects as
this might lead to a short circuit that damages that
causes damage to the battery pack or serious burns
or fire. Keep away from children.
Charger display
Push the battery onto the charger. The red LED
shows that the battery is being charged. When
charging is completed, the red LED turns off and the
green LED lights up.
16.12.19 17:03 16.12.19 17:03