Indesit K6 C51/R Installation Et Emploi page 31

This feature allows you to program the oven or the grill as
follows :
• delayed start for a specific length of time;
• immediate start for a specific length of time;
• timer.
Button Functions:
: timer - hours and minutes;
: cooking time;
: end cooking time;
: set cooking time - backward;
: set cooking time - forward.
How to reset the digital clock.
After the appliance has been connected to the power supply,
or when the power has gone out, the clock display will
automatically reset to 0:00 and begin to blink.
• Press the and buttons consecutively and
then reset the time (within 4 seconds) using the
buttons.
The button sets the time forward.
The button sets the time backward.
Whenever the time must be reset, follow this same procedu-
re.
Manual Operation of the Oven
After resetting the time, the program automatically switches
to the manual mode.
Note: To reset the manual mode after each "automatic"
cooking, press the and
Start delayed cooking with preset duration
The length of the cooking program as well as the time at
which the cooking program ends must be set. If we assume
that the time displayed on the timer is 10:00:
1. Turn the oven control knobs to the feature and temperatu-
re desired (e.g. conventional oven, 200°C);
2. Press the button and then set the cooking time (within
four seconds) using the
pose that we set the cooking time at 30 minutes. The
display will read as follows:
A
After the button has been released, the current time will
be displayed again after approximately 4 seconds, along
with the symbol and the letter "A" (AUTO);
3. Press the button and then use the
to set the time for when the cooking program should end.
Let us suppose this time to be 1:00 p.m.
A
All manuals and user guides at all-guides.com
The electronic cooking programmer
and
buttons simultaneously.
and buttons. Let us sup-
and buttons
4. After the button has been released, the current time will
be displayed after approximately 4 seconds:
A
The letter "A" will light up reminding you that the length
and end cooking time were programmed in automatic
mode. At this point, the oven will turn on automatically at
12:30 and then turn off after 30 minutes. When the oven is
turned on, the symbol will be displayed for the entire
cooking time. At any time during the cooking process, the
length of the cooking time can be displayed by pressing
the button, and the end cooking time by pressing the
button.
After the cooking time has expired, the timer will ring
for several minutes; to turn it off, simply press any of
the buttons except the
Immediate start with preset duration
By programming just the duration (points 1 and 2 of the
"Start delayed cooking with preset duration" section),
cooking will start up immediately.
To cancel a cooking schedule already programmed
Press the and
Timer Feature
The timer feature allows you to enter a given amount of time
from which the timer begins to count down. This feature does
not turn the oven on or off; it merely sounds when the time
has expired.
When the button has been pressed, the display will read
as follows:
Then use the and
After the button has been released, the timer will start to
count down and the current time will be displayed.
After the time has expired, an acoustical signal will be emitted,
which can be turned off by pressing any of the buttons (except
the and buttons) at this point the
turn off.
Correction/Cancellation of Data
• The data entered can be changed at any time by pressing
the corresponding button and the
• When the data for the length of the cooking time is
cancelled, the data for the end cooking time are also
cancelled automatically, and vice versa.
• If the oven has been programmed, it will not accept end
cooking times which are before the start of the cooking
process.
Buzzer volume control
Once you have made and confirmed the clock settings,
use button to adjust the volume of the alarm buzzer.
32
and buttons.
buttons simultaneously.
buttons to set the desired time.
symbol will also
or buttons.