Velleman CAMIP15 Mode D'emploi page 19

6. Setup Wizard
Follow the instructions in the Camera Setup wizard to
complete the installation. (See fig. 6)
7. Using Seedonk
To access your camera, enter the username and password
that you created during the setup process. (See fig. 7)
8. Camera Preview
After login, if the connection to your mobile device is
successful, you will see the camera images on your mobile
device. Proceed with the next step. (See fig. 8)
9. Connect to Internet
1. Choose your Wi-Fi network to connect to internet. (See
fig. 9)
2. Enter your Wi-Fi network password and press Continue
to access internet. (See fig. 10)
3. Wait until your mobile device establishes the internet
connection. (See fig. 11)
10. Connect to Seedonk
1. Create a new Seedonk account or use an existing
account to connect with the Seedonk app. (See fig. 12)
2. Enter your Seedonk username and password and press
Sign in. (See fig. 13)
11. Set up Camera Info
1. Create the camera name (mandatory) and its
description (optional). Press Continue. (See fig. 14)
2. Wait until the camera is registered on the Seedonk
server. (See fig. 15)
12. Complete Setup
When setup is complete, an information screen appears.
(See fig. 16)
1. Set the Wi-Fi setup switch on the back of the camera
to OFF.
V. 01 – 11/07/2012
CAMIP15
19 ©Velleman nv