Labels - Upright X26 Ultra Narrow Guide De L'opérateur

Labels

L
ABELS
These labels shall be present and in good condition before operating the machine. Be sure to read, under-
stand and follow these labels when operating the machine.
3) 064936-099
4) 101210-000
5) 066551-950
6) 066557-930
7) 014222-903
9) 101208-000
10) 060197-000
Page 20
All manuals and user guides at all-guides.com
Model______________ Serial number:___________
Machine weight _______kg Mfg. date:_________
Maximum wheel load:________
Maximum allowable incline of machine when elevated:_____deg.
Occupants and equipment must not exceed the rated maximum
load:_____kg Maximum platform occupants: _____
Maximum allowable sIde force on platform:_____N
Maximum platform height:______m
Maximum platform reach:______m
Maximum allowable wind speed: ______m/s=Beaufort scale_____
Maximum hydraulic system pressure:_____bar
Maximum system voltage: _______Vdc
This machine is manufactured to comply with
Machinery directive 89-392/CEE
CAUTION: CONSULT OPERATOR'S MANUAL BEFORE USE.
11) 061205-003
15) 100102-900
16) 066561-900
17) 005223-906
20) 010076-901
25) 066556-900
26) 066559-900
061205-003
30) 062562-951
31) 066522-900
33) 101208-001
USE OF THE AERIAL WORK PLATFORM: This aerial work platform is intended to lift p ersons and his tools as well as the material
used for the job. It is designed for repair and assembly jobs and assignments at overhead workplaces (ceilings, cranes, roof
structures, buildings etc.). All other uses of the aerial work platform are prohibited!
THIS AERIAL WORK PLATFORM IS NOT INSULATED! For this reason it is imperative to keep a safe distance
from live parts of electrical equipment!
Exceeding the specified permissible maximum load IS PROHIBITED! Read operator's manual for more details.
The use and operation of the aerial work platform as a lifting tool or a crane IS PROHIBITED!
NEVER exceed the manual force allowed for this machine. Read operator's manual for more details.
DISTRIBUTE all platform loads evenly on the platform.
NEVER operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps, curbs,
or debris; and avoiding them.
OPERATE machine only on surfaces capable of supporting wheel loads.
NEVER operate the machine when wind speeds exceed this machine's wind rating. Re ad operator's manual for more details.
IN CASE OF EMERGENCY push emergency stop switch to deactivate all powered functions.
IF ALARM SOUNDS while platform is elevated, STOP, carefully lower platform. Move machine to a firm, level surface.
Climbing up the railing of the platform, standing on or stepping from the platform onto buildings or other structures, IS PROHIBITED!
Dismantling the swing gate or other railing components IS PROHIBITED! Always ma ke certain that the swing gate is closed
and securely locked!
IT IS PROHIBITED to keep the swing gate or liftable bar in an open position when the platform is raised!
To extend the height or the range by placing of ladders, scaffolds or similar de vices on the platform IS PROHIBITED!
NEVER perform service on machine while platform is elevated without blocking elevating assembly.
INSPECT the machine thoroughly for cracked welds, loose or missing hardware, hyd raulic leaks, loose wire connections,
and damaged cables or hoses before using.
VERIFY that all labels are in place and legible before using.
NEVER use a machine that is damaged, not functioning properly, or has damaged or missing labels.
To bypass any safety equipment IS PR ety equipment IS PROHIBITED and presents a danger f OHIBITED and presents a danger for the perso ns on the aer
NEVER charge batteries near sparks or open flame. Charging batteries emit explosive hydrogen gas.
Modifications to the aerial work platform are prohibited or permissible only at the approval by UpRight.
AFTER USE, secure the work platform from unauthorized use by turning the keyswitch off and removing key.
37) 067195-001
114100-020 X26 Ultra Narrow - Operator Manual
29) 101222-905
34) 107051-900
36) 068635-001
ns on the aerial work platf k platform and in its w m and in its working range ange.
40) 107053-000