BALDR B0359WST4H4PR Manuel page 7

All manuals and user guides at all-guides.com
Pressure Unit
inHg
Temperature Unit
℉
Barometer Calibration
● After power on, the pressure reading will be flashing for 10
seconds. If there is no need for calibration, touch the top
button to exit setting. If calibration is required, you can press
"▲/RCC " or " ▼ " button to adjust data; press and hold "▲/
RCC" or " ▼ " button will quickly change the value by 8 steps.
● If no operation within 10 seconds, it will automatically save
and exit setting.
● Barometer range: 23.62-29.53inHg (600-825 mmHg,800-
1100hPa/mb ).
RF Signal Receiving
After barometer setting, It will start receiving 3 outdoor
sensors' signal for 3 minutes. If all 3 channels signal received
within 3 minutes or receiving window ends, it will enter into
WWVB signal receiving window.
WWVB Signal Receiving
1. After RF signal receiving, it will start searching radio signal
for 7 minutes with the antenna symbol displaying on screen，
Weekday Display Time
Language
12:00 AM
ENG
(12H format)
RCC Function
ON
Date Format Display Date
M/D
DST
Zone
Function
ON -5
7
June 15. 2020
Alarm Time
0:00 Alarm OFF