BALDR B0359WST4H4PR Manuel page 16

All manuals and user guides at all-guides.com
Inaccurate
temperature/
humidity
"HH.H/LL.L"
display in indoor
and/or outdoor
temperature
If your BALDR product does not operate properly after
trying the troubleshooting steps, please contact the seller
on your order page or shoot an email to: service@baldr.com.
outdoor sensor. The units must be
within 100m(328ft) of each other.
3. Make sure both units are placed at
least 0.9 m (3 ft) away from
electronics that may interfere with
the wireless communication (such as
TVs, microwaves, computers, etc).
4. Use standard alkaline batteries. Do
not use heavy duty or rechargeable
batteries. NOTE: It may take a few
minutes for main unit and sensor to
synchronize after batteries are
reloaded.
Make sure both the main unit and
sensor are placed out of direct sunlight
and away from any heat sources or
vents.
If the temperature is higher than the
detection range, "HH.H" will display on
screen for indication; if lower than the
detection range, "LL.L" will display on
screen for indication.
16