Pioneer PDR-F10 Mode D'emploi page 10

2 Connecting up
5 If you plan to use the system on a
table-top or shelf, attach Stand B.
If you are going to wall-mount the unit, refer
to Wall-mounting your system in the main
operating instructions.
Stand B
Stand A
Note
If you also have the optional CT-F10 tape
deck, connect its system cable to this unit,
then connect this unit to the CD tuner as
described here.
For more information on connecting and
using the CT-F10 tape deck, see the
accompanying operating instructions.
Important
Pioneer bears no responsibility for accidents
resulting from faulty assembly or installation,
insufficient mounting strength of walls or
other building fixtures, misuse, or natural
disasters.
10
En
All manuals and user guides at all-guides.com
• To remove Stand B, push the center tab, as
indicated, and slide off.
Stand B
PUSH
• To remove Stand A, pull the tab, as
indicated, and slide off.
Stand A
PULL