Door Reversibility - Zanussi ZRG16607WA Notice D'utilisation

Location
CAUTION!
It must be possible to disconnect
the appliance from the mains power
supply; the plug must therefore be
easily accessible after installation.
The appliance should be installed well away
from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate
freely around the back of the cabinet. To ensure
best performance, if the appliance is positioned
below an overhanging wall unit, the minimum
distance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally,
however, the appliance should not be
positioned below overhanging wall units.
Accurate levelling is ensured by one or more
adjustable feet at the base of the cabinet.
min.
100 mm
15 mm 15 mm

Door reversibility

WARNING!
Before carrying out any operations,
remove the plug from the power
socket.
CAUTION!
To carry out the following
operations, we suggest that this be
made with another person that will
keep a firm hold on the doors of the
appliance during the operations.
1. Unscrew both screws on the rear side.
46
All manuals and user guides at all-guides.com
2. Push back the top and lift it.
3. Unscrew the left foot.
4. Unscrew the screws of the door bottom
5. Unscrew and install the screw on the
6. Install the hinge on the opposite side.
7. Screw the right foot.
8. Unscrew the screws of the door top hinge.
9. Remove the hinge. Put over the pin in the
10. Tighten the hinge.
hinge. Remove the hinge. Put over the pin in
the direction of the arrow.
opposite side.
direction of the arrow. Install the hinge on
the opposite side.
1
2
3
www.zanussi.com