Operating Instructions; Cleaning And Maintenance - Fanelite FB-50 Notice D'utilisation

6. OPERATING INSTRUCTIONS

WARNING : Before using your appliance, carefully read the safety instructions in this
manual.
Plug in the power cord.
ON/OFF and speed settings
Use the switch on the motor block to turn ON or OFF the fan and adjust the speed :
0 Off
1 Low speed
2 Medium speed
3 High speed
Oscillation
The metal tab at the bottom of the motor block is used to control the oscillation. If the
adjustment screw is placed in the center hole, the fan will not oscillate. To activate the
oscillation, put the screw in the side hole. Be sure to turn off the power before making the
change.
Notes
To adjust the tilt of the head, stop the fan first and then loosen the tilt adjustment nut. Adjust
the head to the desired position and retighten the nut securely.
If you are not going to use your fan for a long time, we advise you to disconnect the
appliance from the AC power.

7. CLEANING AND MAINTENANCE

WARNING : Before cleaning your appliance, carefully read the safety instructions in
this manual.
We recommend that you keep your appliance clean and clean it at least once a month. It is
recommended that you periodically check the condition of the power cord. If necessary,
replacement requires the use of a special tool : contact an authorized service center for
repairs. If the unit is not used for a long time, store it away from dust and moisture ; We
recommend using its original packaging.
Before cleaning, be sure to switch off the power supply.
To remove dust inside and on the grilles, use a vacuum cleaner with a
suitable nozzle. Do not disassemble the fan to clean it.
Do not use water or detergent to clean the appliance. Use a soft, dry cloth.
All manuals and user guides at all-guides.com
13