GE JCK1000 Installation page 7

Installation Instructions
Cutout for 30"
A
Ovens only Under Counter
For JCT3000, JCT5000, PCT7050 models only.
GE electric cooktops may be installed over this oven. See
cooktop installation instructions for cutout size. See label
on top of oven for approved cooktop models.
63.5 cm (25")
may be necessary
if unit is positioned
between existing
cabinets. Be sure they
are attached securely,
since they will anchor
the oven in the cabinet.
1.9 cm (3/4")
Support Platform
Required
(76.2 cm)
72.4 cm
(28 1/2") Min.
72.7 cm
(28 5/8") Max.
69.2 cm
(27 1/4") Min.
69.4 cm
(27 5/16") Max.
Single Built-In
Electrical connections for
cooktop must be located
in an adjacent accessible
location to the right.
Allow 2.5 cm (1")
overlap top of oven,
1.8 cm (11/16")
overlap side edges
of cutout and 3.2
cm (1 1/4") overlap
bottom of cutout
Must
match
toekick
height
NOTE: This oven is only approved to be
labeled on this unit.
7
240V / 208V Junc- 91.4 cm (36")
tion Box Location
Typical
(Recommended
Countertop
to be in right side
Height
adjacent cabinet)
61 cm (24")
10.2 cm (4")
Typical
Toekick
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line Center Line
34.5" (87.6 cm)
30" models
Cutout – Cutout –
observe all observe all
dimensions and dimensions and
requirements. requirements.
6" (15.24 cm) Min.