Fault Correction - Grizzly BRM 46-144 A-OHV Traduction De La Notice D'utilisation Originale

All manuals and user guides at all-guides.com
Troubleshooting
Problem Possible Cause
Too little petrol in the tank
Incorrect starting sequence
Engine does not
Spark plug connector (
start
not put on correctly
Sooted spark plug
Incorrectly adjusted carburet-
tor mix
Engine starts but
Dirty air filter (
equipment does
not run at full Incorrectly adjusted carburet-
power tor mix
Incorrectly adjusted carburet-
tor mix
Engine splutters,
stops
Sooted spark plug (
Ventilation holes
blocked
Engine overheats
Incorrect spark plug (
Too little engine oil in the
engine
Dirty air filter (
Engine smokes
Too little engine oil in the engine Fill with engine oil (see "initial operation")
Grass too short or too long
Output unsatis-
Blade blunt
factory or engine
labouring Blade blocked with grass, grass
collection box full, ejection
channel blocked
Blade blocked with grass
Blade does not
turn
Blade not installed correctly
Abnormal noises,
Blade not installed correctly
rattling or vibra-
Blade damaged
tions

Fault Correction

Fill with petrol
Follow the instructions for starting the
engine (see "operation")
Attach the spark plug connector
11)
Clean, adjust or replace the spark plug
(see "cleaning and maintenance")
Have the carburettor adjusted by a spe-
cialist workshop
Replace the air filter (see "cleaning and
10)
maintenance")
Have the carburettor adjusted by a spe-
cialist workshop
Have the carburettor adjusted by a spe-
cialist workshop
Clean, adjust or replace the spark plugs
13)
(see "cleaning and maintenance")
( 11)
Clean the ventilation slot
Change the spark plug
13)
Fill with engine oil (see "initial operation")
Replace the air filter (see "Cleaning and
10)
Maintenance")
Change the cutting height (see "setting
the cutting height")
Have the blade sharpened or replaced
by a specialist workshop
Remove the grass (see "cleaning and
maintenance")
Remove the grass
Have the blade installed by a specialist
workshop
Have the blade installed by a specialist
workshop
GB
109